PISO-813 32Ch.AI, 12-bit 10ks/s isolated Board Measurement Systems

PISO-813 32Ch.AI, 12-bit 10ks/s isolated Board

$256

The PISO-813 is a bus-type isolated 12-bit A/D board for the PCI bus for IBM or compatible PC. It features a 10KHz data acquisition under DOS and Windows The PISO-813 provides 32 single-ended analog input. The isolation range of PISO-813 is increased to 3000 V. It is the most cost effective isolated A/D board for the PCI Bus in the world. The PISO-813 has one 37-pin D-sub connector . It can be installed in a 5V PCI slot and can support trully “ Plug & Play “.

Includes one CA-4002 37 pin D-Sub connector.

PISO-813 32Ch.AI, 12-bit 10ks/s isolated Board

Features

PCI bus

32 single-ended analog input channels

12-bit A/D converter ( ADS 774 or equivalent)

3,000Vdc photo-isolation protection

Analog input range

Bipolar: +/-10V,+/-5 V, +/-2.5V, +/-1.25V, +/-0.625V

Unipolar: 0-10V, 0-5V, 0-2.5V, 0-1.25V

Programmable gain control

16-channel DI, 16-channel DO

3000Vdc/DC converter built-in

A/D trigger mode: Software Trigger

A/D data transfer mode : polling

Software

Toolkit for DOS

Toolkit for Windows 95/98

Toolkit for Windows NT

Toolkit for Windows 2000/XP

LabVIEW toolkit for Windows

Toolkit for OCX 95/98

Toolkit for OCX NT

Toolkit for OCX 2000/XP

Driver for LINUX

Driver for DasyLab

Specifications

Analog Input Specifications

Input channel: 32 Single Ended
Resolution : 12-bit
Sampling Rate : 10 ks/s max.
Input Impedance : 10Mohm//6pF
Over voltage protection : +/- 35V
Accuracy : 0.01% of reading, +/- 1 bit
Linearity : +/- 1 bit
On chip sample & hold : Yes
Zero drift: +/- 25ppm/ºC of FS max.

General

I/O Connector : 1x 37-pin D-sub female
Power Requirements : +5V@860mA(Max.)
Operating temperature : 0~60°C
Storage temperature : -20~70°C
Humidity : 0~90% RH, non-condensing
Dimensions : 180mm x 105mm

Technical

PCI Multifunction Boards (Datasheet)

Applications

include:

Harsh Environment Data Acquisition

Signal Isolation

Recommendations

To break out Analog Channels to screw terminals:

DB-37 Direct Connection - 37 pin D-sub conn. to screw terminals
DN-37 37 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1m cable)
DB-8325 37 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1m cable)