PCI-P16R16 16 Channel Isolated Digital IP, 16 Channel Form C Relay OP Board Measurement Systems

PCI-P16R16 16Ch Isolated Digital IP, 16Ch Form C Relay OP Board

$269

The PCI-P16R16 provides 16 optically isolated inputs and 16 electro-mechanical Relay outputs (8x Form C - SPDT, 8x Form A - SPST). It has one 37-pin D-Sub connector and one 40-pin header. It can be installed in a 5V PCI slot and supports "Plug & Play".

The PCI-P16R16 can be used in various applications including load switching, external switching, contact closure and others.

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

PCI-P16R16 16Ch Isolated Digital IP, 16Ch Form C Relay OP Board

Features

32-bit +5V PCI Bus

16 Relay output channels

16 Optical isolated digital input channels

DC signal input with filter or Without filter

AC Signal input with filter

On-board LED indication for relay status

Software

Toolkit for DOS

Toolkit for Windows 95/98

Toolkit for Windows NT

Toolkit for Windows 2000/XP

LabVIEW toolkit for Windows

Toolkit for OCX 95/98

Toolkit for OCX NT

Toolkit for OCX 2000/XP

Driver for LINUX

Driver for Dasylab

Specifications

Relay Output

Contact Rating : 0.5A/120Vac,DC/1A 24Vdc

Contact arrangement: Output channel 0 -3 are form C

Output channel: 4-7 are Form A

Breakdown Voltage: 1kV

Insulation Resistance: 1000Mohm

Operating time: 5 mSec

Release time: 2 mSec

Expected life: 5 million (mechanical), 1 million (electrical)

Switching Power: 60VA, 24W

Optical Isolated Digital Input

Type: Non- polarized Optical Isolation(PC-814)

Operating Temperature: 0~60°C

Input voltage:
Logic \'1\' = AC/DC 5V ~ 24V
Logic \'0\' = AC/DC 0 ~ 1V

Input impedance: 1.2 Kohm/1W

Input Current: 20mA max (24V)

Response time: 20u Sec (Without filter) / 2.2m Sec (With filter)

Isolation: 5000V

Withstanding Voltage: 1kV

General

Power Requirements: +5V@800mA

Operating temperature: 0~60°C

Storage temperature: -20°C~70°C

Humidity: 0 ~ 90% RH, non-condensing

Dimensions: 180 mm x 105 mm

Technical

User Manual Dig I/O Shortform Catalogue

Applications

Factory Automation

Laboratory Automation

Communications switching

Recommendations

Includes one CA-4037W cable (40-pin flat connector to 37-pin D-sub on Rear Panel) and two CA-4002 D-Sub connectors.

For Straight Connection to screw terminals:

DN-37 37 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1m cable)
DB-37 Direct Connection - 37 pin D-sub conn. to screw terminals