Measurement Systems - forefront of the data acquisition market

Sales: Call Toll Free
1-866-567-7450

Support: Call
+44 1635 576800

or E-mail
Worldwide Shipping!
Products
PCI-1202HU 32Ch.AI, 12-bit 44ks/s, 2AO, Dig I/O High Gain Board  $419 

The PCI-1202 series is a family of high performance data acquisition boards.

It features a continuous, 110KHz for low gain (40KHz for high gain), gap-free data acquisition under DOS and Windows. The PCI-1202 family has the same hardware architecture as PCI-1802, and provides 32-channel single-ended or 16-channel differential analog inputs. Like the PCI-1802 family, the PCI-1202 series features " Magic Scan" function, M-function, X-function, and Continuous Capture function.

The PCI-1202LU/HU Universal PCI card supports both 5V and 3.3V. The PCI-1202LU/HU (Universal PCI version) is fully compatible with the older PCI-1202L/H (PCI version), while also having an improvement in D/I pull-high/low design. 

Includes one CA-4002 D-Sub connector.

  

Features

Features

  • 12-bit 110KHz A/D converter
  • 32 single-ended/ 16 differential inputs, 1K word FIFO buffer
  • The total sampling rate is 110K samples/s for low gain model and 40K samples/s for high gain model.
  • Three different external trigger : post-trigger, pre-trigger, middle trigger
  • 16 digital input / 16 digital output channels
  • PCI-1202LU provides programmable low gain: 0.5, 1, 2, 4, 8.
  • PCI-1202HU provides programmable high gain: 0.5, 1, 5, 10, 50, 100, 500, 1000.
  • Internal / external trigger.
  • Two 12-bit independent programmable DAC.; 2 MHz throughput per channel (max.)
  • 2.7 M word /high speed data transfer rate.
  • Universal PCI card, supports both 5V and 3.3V PCI bus.
  • Digital input port can be set to pull-high or pull-low.

Software
  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Driver for LINUX
  • Driver for DasyLab

Specifications

Analog Input Specifications

  • Input channel: 32 Single Ended or 16 Differential (jumper setting)
  • Resolution : 12-bit
  • ADC Conversion Rate : 110ks/s
  • Sampling rate : 44ks/s
  • Input Impedance : 10Mohm//6pF
  • Over voltage protection : +/- 35V
  • Linearity : +/- 1 bit
  • On board FIFO : 1K.
  • Interface : Universal PCI Bus

PCI-1202HU Input Range & Bipolar Unipolar Throughout

    Gain
    0.5
    1
    5
    10
    50
    100
    500
    1000
    Bipolar(V)
    +/-10
    +/-5
    +/-1
    +/-0.5
    +/-0.1
    +/-.05
    +/-.01
    +/-.005
    Unipolar(V)
    0~10
    0~1
    0~0.1
    0~0.01
    Sampling rate
    44KS/s
    44KS/s
    44KS/s
    44KS/s
    10KS/s
    10KS/s
    1KS/s
    1KS/s

Analog Output Specifications

  • Channels : 2
  • Type : 12-bit Double Buffers
  • Linearity : 0.06% FS
  • Settling time : 0.4µs
  • Output Range : -5V ~ +5V or -10V~+10V
  • Output Driving : +/-5mA

Digital I/O

  • Input : 16-channel TTL levels
    Low : VIL = 0.8V max., IIL = -0.4mA max
    High : VIH = 2V min., IIH = 20µA max
  • Output : 16-channel TTL levels
    Low : VOL = 0.5V max., IOL = 8mA max
    High : VOH = 2.7V min., IOH = 0.4mA max

Timer

  • Three 16-bit independent timers, 8Mhz input clock
  • Internal Pacer timer
  • External Pacer timer
  • Machine independent timer

General

  • I/O Connector : 1x 37-pin D-sub female + 2x 20-pin ribbon male
  • Power Requirements : +5V@350mA(Max.)
  • Operating temperature : 0~50°C
  • Storage temperature : -20~70°C
  • Humidity : 0~90% RH, non-condensing
  • Dimensions : 200mm x 105mm

Technical

PCI Multifunction Boards (Datasheet)

Applications

  • High speed data acquisition system
  • Signal Analysis
  • FFT & frequency analysis
  • Transient Analysis
  • Speech Analysis
  • Temperature Monitor
  • Production Test
  • Process monitor and control
  • Vibration analysis.
  • Energy Management
  • Digital pattern generator from digital I/O port
  • Other industrial and laboratory measurement and control
    		•

    Recommendations

    Units supplied with a CA-4002 37-pin connector and shroud.

    To break out Analog Channels to screw terminals:

    DB-1825/DIN Analog Input Screw Terminal Board (DIN-Rail Mounting)

    To break out Digital Channels to screw terminals

    ADP-20/PCI Slot Extender (Rear Panel with dual 20-pin flat-cable connector and internal cables to Card)

    For Straight Connection:
    DN-20 I/O connector block with 2off 20pin headers (DIN-Rail Mounting) supplied with CA-2010 (20 way flat cable - 1m)

    To Isolated Inputs/Relay Outputs:

    16-channel Bi-direction Isolated Input Board; includes 1x CA-2010 (20-pin Flat Cable 1m)
    16-channel Relay Board; includes : CA-2010 (20-pin Flat Cable 1m)
    Terms of Use | Privacy Policy | Resources | Site Map