Measurement Systems - forefront of the data acquisition market

Sales: Call Toll Free
1-866-567-7450

Support: Call
+44 1635 576800

or E-mail

Worldwide Shipping!
Products
PCI-1602F 32Ch.AI, 16-bit 200ks/s, 2AO, Dig I/O Board  $813 

The PCI-1602F is a high performance and high resolution data acquisition board for the PCI bus.

The PCI-1602F provides 32-channel single-ended or 16-channel differential analog inputs (using a 16-bit ADC with 8K word FIFO), along with 2 independant 12-bit Analog Outputs plus 16 Digital Inputs and 16 Digital Outputs.

It features a continuous 200kHz gap-free data acquisition under DOS and Windows. 

The scan function of PCI-1602F is called "Magic Scan" . The variable channel scan function is found in some famous data acquisition board . Compared to Variable channel scan, the Magic Scan improves a many functions to meet the demand of the high end user. The Magic Scan mechanism not only scans the different input channels at vastly different rates, but also at different gain. Even in multi-channel scan, the sampling rates can maintain at 330KS/s. The PCI-1602 series features " Magic Scan" function, M-function, X-function, and Continuous Capture functions.

Includes one CA-4002 D-Sub connector.  

Features

Features

  • PCI bus (v2.1), 33MHz 5V 32-bit.
  • 16-bit 200KHz A/D converter
  • 32 single-ended/ 16 differential inputs 8K word FIFO buffer
  • The sampling rates of single channel or multiple channels is : 200K sample/s
  • Three different external trigger : post-trigger, pre-trigger, middle trigger
  • 16 digital input / 16 digital output channels
  • Programmable low gain: ±10V, ±5V, ±2.5V, ±1.25V
  • Internal / external trigger.
  • Two 12-bit independent programmable DAC; 2 MHz throughput per channel (max)
  • 2.7 M word /high speed data transfer rate.

Software
  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Driver for LINUX
  • Driver for DasyLab

Specifications

Analog Input Specifications

  • Input channel: 32 Single Ended or 16 Differential
  • Resolution : 16-bit
  • ADC Conversion Rate/Sampling rate : 200ks/s
  • Input Impedance : 10Mohm//6pF
  • Over voltage protection : +/- 35V
  • Linearity : +/- 1.5 bit
  • On board FIFO : 8K
  • Programmable Gain : ±10V, ±5V, ±2.5V, ±1.25V

Analog Output Specifications

  • Channels : 2
  • Type : 12-bit Double Buffers
  • Linearity : 0.006% FS
  • Settling time : 0.4µs
  • Output Range : -5V ~ +5V or -10V~+10V
  • Output Driving : +/-5mA

Digital I/O

  • Input : 16-channel TTL levels
    Low : VIL = 0.8V max., IIL = -0.4mA max
    High : VIH = 2V min., IIH = 20µA max
  • Output : 16-channel TTL levels
    Low : VOL = 0.5V max., IOL = 8mA max
    High : VOH = 2.7V min., IOH = 0.4mA max

Timer

  • Three 16-bit independent timers, 8Mhz input clock
  • Internal Pacer timer
  • External Pacer timer
  • Machine independent timer

General

  • I/O Connector : 1x 37-pin D-sub female + 2x 20-pin ribbon male
  • Power Requirements : +5V@350mA(Max.)
  • Operating temperature : 0~60°C
  • Storage temperature : -20~70°C
  • Humidity : 0~90% RH, non-condensing
  • Dimensions : 205mm x 105mm

Technical

PCI Multifunction Boards (Datasheet)

Applications

  • High speed data acquisition system
  • Signal Analysis
  • FFT & frequency analysis
  • Transient Analysis
  • Speech Analysis
  • Temperature Monitor
  • Production Test
  • Process monitor and control
  • Vibration analysis.
  • Energy Management
  • Digital pattern generator from digital I/O port
  • Other industrial and laboratory measurement and control
  • Recommendations

    Units supplied with a CA-4002 37-pin connector and shroud.

    To break out Analog Channels to screw terminals:

    DB-1825/DIN Analog Input Screw Terminal Board (DIN-Rail Mounting)

    To break out Digital Channels to screw terminals

    ADP-20/PCI Slot Extender (Rear Panel with dual 20-pin flat-cable connector and internal cables to Card)

    For Straight Connection:
    DN-20 I/O connector block with 2off 20pin headers (DIN-Rail Mounting) supplied with CA-2010 (20 way flat cable - 1m)

    To Isolated Inputs/Relay Outputs:

    16-channel Bi-direction Isolated Input Board; includes 1x CA-2010 (20-pin Flat Cable 1m)
    16-channel Relay Board; includes : CA-2010 (20-pin Flat Cable 1m)

    Terms of Use | Privacy Policy | Resources | Site Map