Measurement Systems - forefront of the data acquisition market

Sales: Call Toll Free
1-866-567-7450

Support: Call
+44 1635 576800

or E-mail
Worldwide Shipping!
Products
PCI-1002LU 32Ch.AI, 12-bit 110ks/s, Dig I/O Low Gain Board  $314 

The PCI-1002 series is a family of A/D board for PC with PCI bus. It features a 110KHz for low gain model (44KHz for high gain model) data acquisition under DOS and Windows The PCI-1002HU/LU provides 32 single-ended or 16 differential inputs, 16 digital input and digital output channels. The -H means high gain model and the -L means low gain model. The PCI-1002 series provide three flexible external trigger modes, pre-trigger, post-trigger and middle-trigger.

The PCI-1002LU/HU Universal PCI card supports both 5V and 3.3V Buses. The PCI-1002LU/HU (Universal PCI version) is fully compatible with the older PCI-1002L/H (PCI version).

Includes one CA-4002 D-Sub connector.

  

Features

  • PCI bus (v2.1), 33MHz 5V 32-bit.
  • Universal PCI card, supports both 5V and 3.3V PCI bus.
  • Supports system on windows 98/NT/2K/XP 32-bit/2003 32-bit/Vista 32-bit.
  • 12bit resolution, 110KHz conversion sample rate AD converter.
  • 32 single-ended/ 16 differential inputs
  • The sampling rates of single channel or multiple channels is 110K samples/s for low gain model and 44k samples/s for high gain model.
  • Three different external trigger: pre-trigger, post-trigger and external pacer trigger.
  • 16 digital input / 16 digital output channels
  • 1002LU : programmable low gain:1, 2, 4, 8.
  • 1002HU: programmable high gain:1, 10, 100, 1000.
  • Internal / external trigger.
  • Half size board
  • Digital input port can be set to pull-high or pull-low.

    • Software
    • Toolkit for DOS
    • Toolkit for Windows 95/98
    • Toolkit for Windows NT
    • Toolkit for Windows 2000/XP
    • LabVIEW toolkit for Windows
    • Toolkit for OCX 95/98
    • Toolkit for OCX NT
    • Toolkit for OCX 2000/XP
    • Driver for LINUX
    • Driver for DasyLab

    Specifications

    Analog Input Specifications

    • Input channel: 32 Single Ended or 16 Differential (jumper setting)
    • Resolution : 12-bit
    • ADC Conversion Rate : 110ks/s
    • Sampling rate : 110ks/s
    • Input Impedance : 10Mohm//6pF
    • Over voltage protection : +/- 35V
    • Accuracy : 0.01% of reading, +/- 1 bit
    • On chip sample & hold : Yes
    • Interface : Universal PCI Bus

    PCI-1002LU Input Range (Low Gain)

      Gain
      1
      		2 4 8
      Bipolar(V)
      +/-10
      +/-5
      +/-2.5
      +/-1.25
      Sampling rate
      110KS/s
      110KS/s
      110KS/s
      110KS/s

    Digital I/O

    • Input : 16-channel TTL levels
      Low : VIL = 0.8V max., IIL = -0.4mA max
      High : VIH = 2V min., IIH = 20µA max
    • Output : 16-channel TTL levels
      Low : VOL = 0.5V max., IOL = 8mA max
      High : VOH = 2.7V min., IOH = 0.4mA max

    Timer

    • One 16-bit machine independent timer for software (Timer 2).
    • Two 16-bit pacer timers for A/D converter and interrupt (Timer0, Timer1).

    General

    • I/O Connector : 1x 37-pin D-sub female + 2x 20-pin ribbon male
    • Power Requirements : +5V@350mA(Max.)
    • Operating temperature : 0~50°C
    • Storage temperature : -20~70°C
    • Humidity : 0~90% RH, non-condensing
    • Dimensions : 188mm x 105mm

    Technical

    PCI Multifunction Boards (Datasheet)

    Applications

  • High speed data acquisition system
  • Process monitor and control
  • Vibration analysis.
  • Digital pattern generator from digital I/O port
  • Signal Analysis
  • FFT & frequency analysis
  • Transient Analysis
  • Speech Analysis
  • Temperature Monitor
  • Production Test
  • Energy Management
  • Other industrial and laboratory measurement and control
    		•

    Recommendations

    Units supplied with a CA-4002 37-pin connector and shroud.

    To break out Analog Channels to screw terminals:

    DB-1825/DIN Analog Input Screw Terminal Board (DIN-Rail Mounting)

    To break out Digital Channels to screw terminals

    ADP-20/PCI Slot Extender (Rear Panel with dual 20-pin flat-cable connector and internal cables to Card)

    For Straight Connection:
    DN-20 I/O connector block with 2off 20pin headers (DIN-Rail Mounting) supplied with CA-2010 (20 way flat cable - 1m)

    To Isolated Inputs/Relay Outputs:

    16-channel Bi-direction Isolated Input Board; includes 1x CA-2010 (20-pin Flat Cable 1m)
    16-channel Relay Board; includes : CA-2010 (20-pin Flat Cable 1m)
    Terms of Use | Privacy Policy | Resources | Site Map