PISO-P8SSR8AC 8 Channel Isolated Digital IP, 8 Channel SSR-AC Relay Output Board Measurement Systems

PISO-P8SSR8AC 8Ch Isolated Dig IP, 8Ch SSR-AC Relay Output Board

$306

The PISO-P8SSR8AC provides 8 optically isolated inputs and 8 AC-type Solid State Relay outputs. It has one 37-pin D-Sub connector and can be installed in a 5V PCI slot while supporting "Plug & Play".

The PISO-P8SSR8AC can be used in various applications including load switching, external switch or voltage sensing, contact closure and others.

Includes one CA-4002 D-Sub connector.

PISO-P8SSR8AC 8Ch Isolated Dig IP, 8Ch SSR-AC Relay Output Board

Features

32-bit +5V PC compatible PCI bus, Plug and Play

8 AC-type Solid State Relay output channels

8 Optically isolated digital input channels

DC signal input with filter or Without filter

AC Signal input with filter

On-board LED indication for relay output status

Specifications

Isolated Digital Output
Number of Channels: 8
Type: SPST (form A)
Contact rating: 24 ~ 265Vrms @ 1.0Arms
Max. load current: 1.0Arms
Min. load current: 10mArms
Max. off-state leakage current:
0.75mA @ 100Vrms 60Hz
1.5mA @ 200Vrms 60Hz

1 cycle surge current: 50A @ 60Hz
Surge strength: 4000Vac
Max. off-state Voltage drop: 1.2Vrms
Max. operate time: 1ms
Max. release time: 1/2 cycle + 1ms
Long life, maintenance free
Optical Isolated Digital Input
Number of channels: 8
Type: Non- polarized Optical Isolation(PC-814)
Operating Temperature: 0~60°C
Input voltage:
Logic \'1\' = AC/DC 5V ~ 24V
Logic \'0\' = AC/DC 0 ~ 1V

Input impedance: 1.2 Kohm/1W
Input Current: 20mA max (24V)
Response time: 20u Sec (Without filter) / 2.2m Sec (With filter)
Isolation: 5000V
Withstanding Voltage: 1kV
General
Power Requirements: +5V@300mA
Operating temperature: 0~60°C
Storage temperature: -20°C~70°C
Humidity: 0 ~ 90% RH, non-condensing
Dimensions: 146 mm x 105 mm

Technical

Dig I/O Shortform Catalogue

Applications

Factory Automation

Laboratory Automation

Communications switching

Industrial Automation

Recommendations

Units supplied with a CA-4002 37-pin connector and shroud.

For Straight Connection to screw terminals:

DN-37 37 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1m cable)
DB-37 Direct Connection - 37 pin D-sub conn. to screw terminals