PIO-D48 48-channel OPTO-22 Digital IO Board Measurement Systems

PIO-D48U 48-channel OPTO-22 Digital IO Board Universal PCI

$168

The PIO-D48 provides 48 TTL digital I/O lines, consisting of six 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.

The PIO-D48 has one D-Sub connector and one 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis.

This card can be installed in a 32-bit 5 V PCI bus and can support "Plug & Play".

NOW Universal PCI so can be installed in 3.3V or 5V bus PCI slots.

PIO-D48U 48-channel OPTO-22 Digital IO Board Universal PCI

Features

32-bit +5V PC compatible PCI bus, Plug and Play

Double side SMT, short card, power saving

All I/O lines buffered on the board

48 channel digital TTL/DTL I/O Lines

Emulate 7/6/4 Industrial standard 8255 PPI mode 0

Programmable direct-trigger interrupt source

High output driving capability

Output status readback

DIO response time is about 0.77 us (1.3 MHz max.)

Direct Interface with OPTO-22 compatible I/O Modules

Software

Toolkit for DOS

Toolkit for Windows 95/98

Toolkit for Windows NT

Toolkit for Windows 2000/XP

LabVIEW toolkit for Windows

Toolkit for OCX 95/98

Toolkit for OCX NT

Toolkit for OCX 2000/XP

Driver for LINUX

Driver for Dasylab

Specifications

One DB-37 connector and one 50-pin flat-cable connectors

Input Logic high voltage : 2.4V min.

Input Logic low voltage : 0.8V max.

Output Sink Current : 64mA max.

Output Source Current : 32mA max.

Each connector consists of three 8-bit port, PA, PB & PC in every connector

Each port can be programmed as D/I or D/O independently

Each board = 2 connector = 2*3 port = 2*3*8 bit =48 bit

Programmable interrupt sources : P2C3, P2C7, P5C3, P5C7

All signals are TTL compatible

Power Requirements : +5V@500mA

Operating temperature : 0~60°C

Storage temperature : -20~70°C

Humidity : 0~90% RH, non-condensing

Dimensions : 156mm x 105mm

Technical

Dig I/O Shortform Catalogue

Applications

Factory Automation

Laboratory Automation

Communication Switching

Industrial Automation

Recommendations

To break out Digital Channels to PC Rear Panel

ADP-37/PCI Slot Extender (Rear Panel with 37-pin d-sub connector and internal 50 way cable to Card)

ADP-50/PCI Slot Extender (Rear Panel with 50-pin flat-cable connector and internal cable to Card)

For Straight Connection to screw terminals:

DN-37 37 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1m cable)
DN-50 50 pin Ribbon to DIN Rail Mounting Screw Terminal board (via 1.5m cable)

To Isolated Inputs/Relay Outputs:

DB-24P/DIN DIN Rail Mounting 24-channel OPTO-22 Isolated Input Board (50w ribbon)
DB-24PD/DIN DIN Rail Mounting 24-channel OPTO-22 Isolated Input Board (37p D-Sub)

DB-24R/12/DIN DIN Rail Mounting 24-channel Relay Output Board (50w ribbon, needs 12V external supply)
DB-24RD/12/DIN DIN Rail Mounting 24-channel Relay Output Board (37p D-Sub, needs 12V external supply)

DB-24R/24/DIN DIN Rail Mounting 24-channel Relay Output Board (50w ribbon, needs 24V external supply)
DB-24RD/24/DIN DIN Rail Mounting 24-channel Relay Output Board (37p D-Sub, needs 24V external supply)

Also available (not currently on-line but if you wish to order via the website, please get in touch and we will add) :
plain PCB versions of the DIN-Rail Mounting boards above

DB-24POR & POR/D 24 Channel Photo-MOS Relay Output Board (DIN-Rail mounted or just PCB)
DB-24PR & PRD 24 Channel Power Relay Output Board (+12V & +24V versions, DIN-Rail mounted or just PCB)
DB-24OD 24 Channel Open Drain Output Board (DIN-Rail mounted or just PCB)
DB-24C & C/D 24 Channel Open Collector Output Board (DIN-Rail mounted or just PCB)
DB-24SSR & SSR/D 24 Channel Solid State Relay Output board (DIN-Rail mounted or just PCB)
DB16P8R & /D version 16 Channel Isolated Digital Input and 8-channel Relay Output Board (DIN-Rail mounted or just PCB)