Measurement Systems - forefront of the data acquisition market

Sales: Call Toll Free
1-866-567-7450

Support: Call
+44 1635 576800

or E-mail
Worldwide Shipping!
Products
PISO-DA2 2Ch., 12-bit isolated Analog Output Board  $288 

The PISO-DA2 is a PCI bus analog output board with two output channels and isolated 12-bit resolution for IBM personal computer and compatibility. The output range can be configured as voltage output by one of the different ranges: ±10V, ±5V, 0~10V, 0~5V or current output using loop sink by the range: 0~20mA or 4~20mA. Besides, output channel is isolated each other and its isolation range is increased the voltage more than 3000Vdc. The output terminals of the PISO-DA2 are two sets of 9-pin D-type female connectors. PISO-DA2 can be installed in a 5V PCI slot and truly supports “Plug & Play” function of PCI-bus. The maximum conversion rate of the analog output is 10KS/s. It can be thought as the most cost-effective isolated D/A board for the PCI bus interface.
Includes two CA-PC09M D-Sub connectors.

Features

  • Two independent 12-bit analog output channels
  • 3750Vdc isolation protection
  • 3000Vdc isolation DC/DC converter build-in
  • Software calibration
  • Unipolar or bipolar output available from each converter
  • Two pacer timer interrupt source
  • The voltage or current output can be set to arbitrary values or reset to zero when the power is on.
  • Double buffered D/A batches.
  • The calibration data is fully stored in EEPROM

    • Software
    • Toolkit for DOS
    • Toolkit for Windows 95/98
    • Toolkit for Windows NT
    • Toolkit for Windows 2000/XP
    • LabVIEW toolkit for Windows
    • Driver for LINUX

    Specifications

    Analog Output Specifications

    • Channels: 32 Single Ended
    • Resolution : 12-bit
    • Conversion Rate : 10 ks/s max.
    • Sampling Rate : 10 ks/s max.
    • Analog output range : Voltage output : Bipolar: ±10V, ±5V
      Unipolar: 0~10V, 0~5V
      Current output : Current loop sink: 0~20mA, 4~20mA
    • Reference Voltage : Internal:-5V and -10V
      External: DC -5 and -10V
    • Current Loop Excitation Voltage : +8V~+36V
    • Isolation Voltage : 3750Vdc
    • Converter : AD7541 or equivalent
    • Trigger Mode : Software trigger
    • Data Transfer : Software control
    • Accuracy : 0.015% of reading FSR (Full Scale Range)
    • Linearity : ±1/2 LSB

    General

    • I/O Connector : Two 9-pin D-type female connectors
    • Power Requirements : +5V@860mA(Max.)
    • Operating temperature : 0~50°C
    • Storage temperature : -20~70°C
    • Humidity : 0~90% RH, non-condensing
    • Dimensions : 170mm x 122mm

    Technical

    PCI Analog Output Boards (Datasheet)

    Applications

  • Arbitrary Waveform generation
  • Control of valves, switches & relays
  • programmable voltage sources
  • Servo Control
  • programmable current sink
    		•

    Recommendations

    Units supplied with two CA-PC09M D-Sub connectors

    To break out Analog Channels to screw terminals:

    DB-8425/DIN 9 pin D-sub to DIN Rail Mounting Screw Terminal board (via 1.5m cable)
    Terms of Use | Privacy Policy | Resources | Site Map